Pioneer FH-P4400 - Manuel (Page 35)

Playing Discs on a 50-Disc Type Multi-CD Player
When a magazine is loaded into a 50-Disc type Multi-CD Player, information on all the
discs in the magazine is read.
If you start playing a disc on a 50-Disc type Multi-CD Player before reading of informa-
tion on all discs has been completed, reading of information stops part way through. This
will prevent you from using the ITS function. (If you try and use this function, “NOT
READY” is displayed.)
If this happens, reading of information begins again when you switch to a component other
than the 50-Disc type Multi-CD Player.
Disc Number Rough Search
This handy function lets you select discs loaded in a 50-Disc Multi-CD Player using the
1–5 buttons. The 50 discs are divided into five blocks, with each of the 1–5 buttons
assigned to a block.
Note:
• Rough search of discs 1 to 9 is not possible. Use the
5/∞ buttons to select a desired disc.
• “LOAD” will be displayed in the following cases:
* If the disc in the extra tray is selected.
* If the disc is moved from the extra tray to the magazine.
(Refer to the 50-Disc type Multi-CD player’s owner’s manual.)
1. Press the appropriate button from 1–5 to select the block containing the
desired disc.
2. Press the
5/∞ buttons to select the desired disc, after completing a rough
search.
34
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS