Panasonic WV-CS954 - Manuel (Page 47)

-47-
Problem Cause and Recommended Action Reference Pages
Poor picture color
• Is the dome cover or lens of the camera dirty? If so,
clean them.
7
• Use the special setup menu to adjust picture
quality.
39
• Check the white balance setting. 25
Image flicker • If Super Dynamic 3 is turned on, turn it off. 22-23
Afterimages in
the picture
• Check the DNR setting. 25
Black and white picture
picture • The camera has an auto black and white switching
mode function. Check the setting of this mode.
25-26
Frequent switching
between the color and
the black and white
modes
• Adjust the black and white mode switching level,
and the duration time setting.
25-26
White specks in the
picture
• Use the PIX OFF function to perform blemish
compensation.
39
Menu does not open.
• Is the camera connected correctly? See the
operating instructions that come with the system
controller you are using. —
• Are camera communication settings configured
correctly?
12-14
18-19
20