Dealing with problems, Summary), Battery indicator – Panasonic CF-07 Manuel d'utilisation

Page 34: Reference manual, Wireless display

Advertising
background image

34

T

roubleshooting

Dealing with Problems

(Summary)

The red indicator
lights.
Repeated beeping
sound while the com-
puter is in use.
The red indicator
blinks

The orange indicator
blinks
The green indicator
blinks

The battery level is low. Save your data and power off your
computer.
After connecting the AC adaptor or replacing the battery pack
with a fully charged one, turn your computer on.

The battery pack or recharging function may be defec-
tive. Quickly remove the battery pack and disconnect the
AC adaptor, then connect them again.
If the problem persists, contact Panasonic Technical Sup-
port.

Unable to charge because of an improper temperature range.
(

page 8)

Battery is discharging to prescribed charging level in high
temperature mode.

Battery Indicator

Is Acrobat Reader installed?
If Acrobat Reader is not installed, run [c:\util\reader\setup.exe]*
in [Start] - [Run] to reinstall the program. When installing
the program, do not change the installation destination folder.
If the destination folder is changed, the Reference Manual
cannot be opened from the [Start] menu.
*

Windows 2000

: [c:\util\reader\ar405.exe]

If an attempt is made to open a PDF file from [Windows
Explorer], etc., by clicking on the file, there are cases Acro-
bat Reader will no longer start up. In such cases, restart the
computer.
To open a PDF file, run Acrobat Reader first and then specify
the name of the file to open in [File] - [Open]. For the Refer-
ence Manual, this procedure does not need to be followed.
The Reference Manual can be opened by selecting [Refer-
ence Manual] in [Start] - [Programs] - [Panasonic] - [On-
Line Manuals].

Reference Manual

The Reference Manual
is not displayed

Windows 2000

A PDF file cannot be
opened

Wireless Display

(except below

Operating Instructions of the wireless display)

Wireless connection
is interrupted

Select

on the taskbar of the external display, then select

[Configuration], and then set [Tx Rate] to [Auto 1 or 2 Mb].

page 19

Advertising