Access code, General description, Setting the access code – Panasonic UF-890 Manuel d'utilisation
Page 86: General description setting the access code
86
Access Code
The Access Code prevents an unauthorized user from operating the machine. Once a 4-digit Access Code
is registered, no one can operate the machine without entering the correct access code.
Automatic Receiving, however, is always available. After you complete any operation, such as mode setting
or transmission, and the display returns to standby, you have to re-enter the access code in order to use the
machine again. Registering the Access Code does not affect the use of the machine in any other way.
NOTE
1. To erase the Access Code, enter the Access Code and press
and follow the
procedure above to step 3, then press
and
.
General Description
Setting the Access Code
1
SET MODE (1-6)
ENTER NO. OR
∨
∧
2
FAX
PARAMETER(01-99)
NO.=
❚
3
38 ACCESS CODE
❚❚❚❚
4
Enter a 4-digit Access Code.
Ex:
38 ACCESS CODE
1234
5
38 ACCESS CODE
1:ALL 1234
6
Select Restriction Level.
for All operations
or
for Setting and Printing the Fax Parameters only.
Ex:
38 ACCESS CODE
2:PARAMETERS 1234
7
FUNCTION
7
4
SET
3
8
SET
1
2
3
4
SET
1
2
2
SET
STOP
SET
CLEAR
SET
STOP