Direct transmission, Sending documents – Panasonic UF-890 Manuel d'utilisation

Page 52

Advertising
background image

Sending Documents

52

If your machine’s memory is full or you wish to send the document immediately, use Direct Transmission.

Manual Number Dialing (Direct Transmission)

To dial the telephone number manually, follow the steps below.

NOTE

1. If you need a special access number to get an outside line, dial it first then press

to

enter a pause (represented by a "-") before dialing the full number.
Ex: 9 PAUSE 5551234

2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,

press

(represented by a "/").

The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex: 9 PAUSE TONE 5551234

3. To stop the transmission, press

.

The display shows:

COMMUNICATION STOP?

1:YES 2:NO

Press

to stop the transmission. The Communication Journal will not print out regardless of

the printout mode setting of the Communication Journal.

Direct Transmission

1

Set document(s) face down.

ENTER STATION(S)

THEN PRESS START 00%

2

Make sure that the lamp goes off.

ENTER STATION

00%

3

Enter a telephone number from the keypad.

Ex:

PRESS START TO DIAL

5551234

4

Your machine starts to dial the telephone number.

* DIALING *

5551234

MEMORY

5

5

5

1

2

3

4

START

PAUSE

TONE

STOP

1

Advertising