Panasonic WV-CW864A Manuel d'utilisation

Page 24

Advertising
background image

-24-

This determines the starting point and the cursor
moves to END.

(3) Move the joystick to select a panning endpoint

and press the CAM (SET) key.
This determines the endpoint and the cursor
moves to POSITION.

4. To set a panning speed

Move the cursor to SPEED, and set a panning
speed with the joystick.

The panning speed increases when the joystick is
moved to the right, and decreases when it is moved
to the left.

Caution: If the panning range is changed after the

camera has not panned for a long time or has been
panning in the same panning range, the picture may
not be clear or noise may appear. In such cases,
pan the camera fully several times.
If this does not eliminate the problem, refer servicing
to qualified service personnel.

5. To set ENDLESS to ON/OFF

Move the cursor to ENDLESS, and select ON or OFF
with the joystick.

ON: The camera pans from the starting point to the

endpoint, and keeps rotating in the same direc-
tion to return to the starting point. Set PAN LIMIT
to OFF before ENDLESS is set to ON.

OFF: The camera pans from the starting point to the

endpoint, and rotates backward to the starting
point.
This movement is repeated over and over.

6. To set a dwell time

Move the cursor to DWELL TIME and select a dwell
time with the joystick.

Dwell time changes as follows:

7. To set pan limit ON/OFF

Move the cursor to PAN LIMIT and select ON or OFF
with the joystick.
The factory default setting is OFF.
ON: Manual pan is limited from the starting point to

the endpoint specified by position setting. Set
ENDLESS to OFF before PAN LIMIT is set to ON.

OFF: Manual pan is not limited.
Note: When ON is selected for PAN LIMIT, manual

pan moves the camera away from the other side
(PAN LIMIT) of the start-end range.

8. To set zoom limit ON/OFF

Move the cursor to ZOOM LIMIT and select ON or
OFF with the joystick.

ON: Limits the manual zoom operation by following

the procedure below.

(1) Move the cursor to ZOOM LIMIT, select ON and

press the CAM (SET) key.
The ZOOM LIMIT setting menu appears.

** AUTO PAN **

POSITION

SPEED

ENDLESS
DWELL TIME
PAN LIMIT
ZOOM LIMIT

RET

START
END
••••|••••
L H
OFF
1S
OFF
OFF

** AUTO PAN **

POSITION

SPEED

ENDLESS
DWELL TIME
PAN LIMIT
ZOOM LIMIT

RET

START
END
••••|••••
L H
OFF
1S
OFF
OFF

** AUTO PAN **

POSITION

SPEED

ENDLESS
DWELL TIME
PAN LIMIT
ZOOM LIMIT

RET

START
END
••••|••••
L H
ON
1S
OFF
OFF

** AUTO PAN **

POSITION

SPEED

ENDLESS
DWELL TIME
PAN LIMIT
ZOOM LIMIT

RET

START
END
••••|••••
L H
OFF
1S
OFF
OFF

0S

1S

2S

3S

30S

5S

10S

20S

** ZOOM LIMIT **

ZOOM

RET

PUSH SET

Advertising