Pioneer HTS-570 - Manuel (Page 18)

Getting started 04
18
En
Chapter 4
Getting started
System demo setting
Switches the automatic demo feature on or off (this
starts when you plug in for the first time).
1 Switch the system into standby.
2 Press SETUP .
3 Use the / (cursor left/right) buttons to select
DEMO from the menu, then press ENTER .
4 Use the / (cursor up/down) buttons to select a
setting, then press ENTER .
Select from:
• DEMO ON – Switches the demo display on.
• DEMO OFF – Switches the demo display off and the
system into standby.
Using the Auto MCACC setup for
optimal surround sound
The Multichannel Acoustic Calibration (MCACC) system
measures the acoustic characteristics of your listening
area, taking into account ambient noise, and testing for
channel delay and channel level. After you have set up
the microphone provided, the system uses the
information from a series of test tones to optimize the
speaker settings and equalization (Acoustic Calibration
EQ) for your particular room. 1
Important
• The test tones used for Auto MCACC setup are loud;
however, do not turn the volume down during setup
as this may result in a sub-optimal setup.
• Make sure the microphone and speakers are not
moved during the MCACC setup.
1 Connect the microphone to the MCACC SETUP MIC
jack on the rear panel.
ST
TUNE
TUNE
ST
ENTER
ENTER
CLEAR
SOUND
SETUP
TEST
TONE
SOUND
SLEEP
SR
ST
TUNE
TUNE
ST
ENTER
SETUP
Note
1 You only need to use the Auto MCACC setup once (unless you change the placement of your speakers or your room layout).
VOLUME
STANDBY/ON
MUTE
TUNER
DVD DTV PC/GAME AUX
STANDBY/ON
ST
TUNE
ST
ENTER
TV INPUT
SOUND TEST
TONE
CHANNEL
SOUND RETRIEVER
MCACC ADVANCED F.S.SURR SURROUND
VOLUME
MCACC
MCACC SETUP MIC
SYSTEM CONNECTOR
AC IN
CONTROL IN
CONTROL
USE ONLY WITH DISPLAY UNIT. SEE INSTRUCTION MANUAL.
OUT SUBWOOFER
CENTER FRONT
SURROUND DVD (COAXIAL) DTV (OPTICAL) PC/GAME (OPTICAL) SPEAKERS DIGITAL
AUDIO INPUT
ANALOG
AUX
AM LOOP ANTENNA FM UNBAL 75
R L
R L
R
L
MCACC
SETUP MIC
HTS-570.book 18 ページ ２００７年１月２９日 月曜日 午後９時７分