Connecting up 02 – Pioneer HTS-570 Manuel d'utilisation

Page 12

Advertising
background image

Connecting up

02

12

En

2

Assemble the AM loop antenna.

a. Bend the stand in the direction indicated by the

arrow.

b. Clip the loop onto the stand.

c. If you want to fix to a wall or other surface, perform

step b after first securing the stand with screws.

It is recommended that you determine the reception
strength before securing the stand with the screws.

3

Connect the AM and FM antennas

1

.

a. Connect one wire of the AM loop antenna to each AM

antenna terminal

2

.

For each terminal, press down on the tab to open;
insert the wire, then release to secure.

b. Push the FM antenna

3

plug onto the center pin of the

FM antenna socket.

4

Connect each speaker.

• The front and surround speaker cables have a color-

coded connector at one end and two bare wires at the
other end.

• Since there is only one terminal to connect the two

center speakers, you will need to use the supplied Y-
cable for the connection.

• Twist and pull off the protective shields on each wire.

• Connect the wires to the speaker. Each speaker in the

illustration can be identified by means of the color-
coded indicator provided on the rear-surface model
label. Match the color-coded wire with the color
indicator on the model label, then insert the color-
coded wire into the red (

+

) side and the other wire

into the black (

) side.

• When connecting the center speakers, connect the Y-

cable dual end to the two center speakers in the
same way.

• Connect the other end to the color-coded speaker

terminals on the rear of the receiver subwoofer. Make
sure to insert completely.

The small lug at the wire-end of the speaker plug
should face up or down depending on whether it’s
being plugged into one of the upper or lower speaker
terminals. Please make sure to connect correctly.

Note

1 • Keep antenna cables away from other cables, the display unit and receiver subwoofer.

• If reception with the supplied antenna is poor, see

Improving poor FM reception

and

Improving poor AM sound

on page 23 or

Connecting

external antennas

on page 27.

• Do not attach any antenna other than the provided loop antenna, or an external antenna as described on page 27.

2 • Don’t let it come into contact with metal objects and avoid placing near computers, television sets or other electrical appliances.

• If radio reception is poor, you may be able improve it by re-inserting each antenna wire into the opposite terminal.
• For best reception, do not untwist the AM loop antenna wires or wrap them around the loop antenna.

3 To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of the unit.

a

b

c

2

1

Color-coded wire
(Connect to speaker)

Color-coded connector
(Connect to rear panel)

Y-cable

To Receiver subwoofer

Upper terminal

Lower terminal

HTS-570.book 12 ページ 2007年1月29日 月曜日 午後9時7分

Advertising
Ce manuel est liée aux produits suivants: