Television 36, Dvd player and muti-dvd player 36, Selecting aux as the source 36 – Pioneer DEH-P6500 Manuel d'utilisation

Page 36: Setting the aux title 36, Turning the clock display on or off, Using the aux source, Other functions, Television, Dvd player and muti-dvd player, Selecting aux as the source

Advertising
background image

Television

Button

Operation

PAUSE

Press to turn loudness on or off.

AUDIO

Press and hold to turn best stations se-

quential memory on. Press to turn best

stations sequential memory off.

DISPLAY

Press to quickly lower the volume level,

by about 90%. Press once more to re-

turn to the original volume level.

FUNCTION No function.

DVD player and Muti-DVD player

Button

Operation

PAUSE

Press to turn pause on or off.

AUDIO

Press to select the repeat range.

DISPLAY

Press to quickly lower the volume level,

by about 90%. Press once more to re-

turn to the original volume level.

FUNCTION No function.

Turning the clock display

on or off

You can turn the clock display on or off.

% Press CLOCK to turn the clock display

on or off.

Each press of CLOCK turns the clock display

on or off.

# The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 6 seconds.

Note

Even when the sources and the feature demo are
off, the clock display appears on the display.
Pressing CLOCK turns the clock display on or
off.

Using the AUX source

An IP-BUS-RCA Interconnector such as the

CD-RB20/CD-RB10 (sold separately) lets you

connect this unit to auxiliary equipment fea-

turing RCA output. For more details, refer to

the IP-BUS-RCA Interconnector owners man-

ual.

Selecting AUX as the source

% Press SOURCE to select AUX as the

source.

Press SOURCE until AUX appears in the dis-

play.

# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting
on page 32.

Setting the AUX title

The title displayed for the AUX source can be

changed.

1 After you have selected AUX as the

source, press FUNCTION and hold until

TITLE appears in the display.

2 Press 1 numbered button to select the

desired character type.

Press 1 numbered button repeatedly to switch

between the following character type:

Alphabet (upper case), numbers and symbols

Alphabet (lower case)

# You can select to input numbers and symbols
by pressing 2 numbered button.

3 Press a or b to select a letter of the al-

phabet.

Each press of a will display a letter of the al-

phabet in A B C ... X Y Z, numbers and sym-

bols in 1 2 3 ... @ # < order. Each press of b

will display a letter in the reverse order, such

as Z Y X ... C B A order.

Other Functions

En

36

Section

09

HHHHHHHHHHHHHH

Advertising