Listening to the radio saving station presets, Naming station presets, Using the tuner – Pioneer ELITE SX-A6MK2-K Manuel d'utilisation

Page 15: Using the tuner 05, Chapter 5, Listening to the radio, Saving station presets

Advertising
background image

Using the tuner

05

15

En

English

Chapter 5:

Using the tuner

Listening to the radio

The following steps show you how to tune in to
FM and AM radio broadcasts.

1

Press TUNER then press BAND to select

the tuner band.

2

Tune to a station.

There are four ways to do this:

Automatic tuning – Press and hold

/

for about a second. Searching
automatically stops at the next station.

Manual tuning – To change the frequency
one step at a time, press

/.

High speed tuning – Press and hold

/

continuously.

Direct access – Use the number buttons to
enter the frequency (For example, to tune

to 106.00 (FM), press 1, 0, 6, 0, 0).

1

If the TUNED or STEREO indicators don’t light
when tuning to an FM station because the
signal is weak, press the MPX button to switch
the receiver into mono reception mode. This
should improve the sound quality and allow
you to enjoy the broadcast.

Saving station presets

This receiver can memorize up to 30 stations,
stored in three banks of 10 stations each.

2

1

Tune to a station you want to memorize

then press T.EDIT.
The display shows ST. MEMORY, then a
blinking memory class.

2

Press CLASS to select one of the three

classes then press

/ to select the station

preset you want.

3

Press ENTER to store the station.

Naming station presets

You can name your station presets for easy
recall.

1

Choose the preset you want to name.

See Listening to station presets below.

2

Press T.EDIT.

A cursor appears at the first character position.

3

Input the name you want then press ENTER.

Names can be up to four characters long.

• Use the

/ buttons to select

characters, and ENTER to confirm. If no
character is input, a space is input.

Tip

• Once you have named a station preset, you

can press DISPLAY when listening to a
station to switch the display between the
name and the frequency.

Note

1 If you make a mistake halfway through, press D.ACCESS twice to cancel the frequency and start over.
2 When saving an FM frequency, the MPX setting is also stored.

A6MK2_CUXCN.book 15 ページ 2009年4月15日 水曜日 午前10時26分

Advertising