Panasonic PT-D4000U - Manuel (Page 27)

27
Returning to the previous
page
• Pressing the MENU button returns the screen to
the previous menu page.
• When the MAIN MENU is on the screen, pressing
the MENU button clears all menus from the screen.
Menu items shown in
black characters
• Some menu items may not be valid for certain
signal formats applied to the projector.
The menu items that cannot be adjusted or used
are shown in black characters, and they cannot be
selected.
Menu items setting
• The bottom prompt line differs on each menu
depending on the selected menu option:
• A prompt “ CHANGE” appears when
changing the setting.
• A prompt “ ADJUST ” appears for a
separate bar graph.
Resetting to the factory
default
DEFAULT button is used to reset all of the projector
adjustment values to the default levels which were
set at the time of shipment from the factory.
PICTURE
PICTURE MODE
CONTRAST
BRIGHTNESS
COLOR TEMP
WHITE GAIN
SYSTEM DAYLIGHT VIEW
SHARPNESS
NOISE REDUCTION
SYSTEM SELECTOR
AI
ADJUST
MENU SELECT
STANDARD
0
0
COLOR
TINT 0
0
+6
+6
DEFAULT
OFF
1
ON
AUTO
Basic menu operations
Press the MENU button.
The MAIN MENU appears on the screen.
Select (highlight) the desired item with
the
or button.
Selected items are displayed in yellow.
Press the ENTER button to enter your
selection.
The submenu for the selected option will now open.
(e.g. : POSITION Menu)
Highlight the desired adjustment item
with the
or buttons, then change
the parameter value with the or
buttons.
(Example of separate adjustment screen)
• If no button is operated for approx. 5 seconds
while a bar graph is displayed, the screen will
return to the previous page.
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
OPTION1
OPTION2
TEST PATTERN
NETWORK
SECURITY
SUB MENU
MENU SELECT
POSITION
SHIFT
ASPECT
ZOOM
CLOCK PHASE
KEYSTONE
MENU SELECT
4:3
+16
SUB MENU
CLOCK PHASE +16
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
OPTION1
OPTION2
TEST PATTERN
NETWORK
SECURITY
SUB MENU
MENU SELECT