Automatic adjustment (auto setup), Using the shutter function, Status function – Panasonic PT-D4000U Manuel d'utilisation

Page 25

Advertising
background image

25

Automatic adjustment
(AUTO SETUP)

Automatic adjustment function adjust the resolution,
clock phase and image position automatically when
dots-structured analog RGB signals such as computer
signal are supplied. (Automatic adjustment is not
available if moving picture input signals or signals
having a dot clock frequency of more than 150 MHz
are supplied.) When DVI signals are input, the image
position is adjusted automatically.
It is recommended to supply images with a bright white
frame at the outermost periphery containing characters
etc. that are clear in white and black contrast when the
system is in automatic adjustment mode. Avoid
supplying images that involve halftones or gradation
such as photographs and computer graphics.

• “CLOCK PHASE” may have been shifted

even when the adjustment ended
normally. In this case, manually adjust the
“CLOCK PHASE”.

• Automatic adjustments cannot be

performed when images with blurred
edges or dark images are input.
With Composite sync and G-SYNC sync
signals and some types of PCs, it may not
be possible to perform these automatic
adjustments.
In this case, manually adjust the items of
“INPUT RESOLUTION”, “CLOCK PHASE”
and “SHIFT”.

• Image may be disturbed for about 4

seconds during automatic adjustment,
which is not an abnormal error.

Note

Using the SHUTTER function

If the projector is not going to be used for a certain
period of time such as while a meeting is on a break or
preparations are being made, the mechanical shutter
can be used to hide the images temporarily.

Press the SHUTTER button of the
remote control or the main unit.

The image is turned off.

Press the SHUTTER button again.

The image comes back.

How to adjust the lens
position to the left or right

When the lens left/right adjustment dial is turned
clockwise, the screen moves toward the left;
conversely, when it is turned counterclockwise, it
moves toward the right. The maximum travel
distance toward the left or right is about 10 % of
the projection screen width.

Maximum
adjustment
position

The screen
moves toward
the left

The screen

moves toward

the right

Lens left/right
adjustment dial

• Move the lens left/right adjustment dial

to any position up to the maximum
adjustment position to make the
adjustment. Turning the dial with undue
force may cause malfunctioning.

Attention

This shows the projector status. It can also be used to
send information about the projector’s status via E-
mail.

Press the STATUS button on the remote
control.

Status function

STATUS

INPUT

PROJECTOR RUNTIME

INTAKE-AIR TEMP.
OPTICS MODULE TEMP.
TEMP. AROUND LAMP
MAIN VERSION
NETWORK VERSION
REMOTE2

XGA60

RGB1

48.36kHz/60.00Hz

33h

13h/ ON/
13h/ ON/

LAMP1
LAMP2

25

°C / 77 °F

37

°C / 98 °F

37

°C / 98 °F

1.00.00
1.00

DISABLE

EXIT

SEND STATUS VIA E-MAIL

• For details, refer to “Setting the network”,

“Connecting the PC” and “Using Web
Browser Control” (pages 37 to 45).

Note

Advertising