Pioneer AVIC-N3 - Manuel (Page 16)

<CRD4069A/U> 16
When connecting a Rear view camera
When using this product with a rear view camera, automatic switching to video from a rear
view camera is possible when the gear shift is moved to REVERSE (R) position.
Rear view mode also allows you to check what is behind you while driving.
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE
MAY RESULT IN INJURY OR DAMAGE.
• The screen image may appear reversed.
• The rear view camera function is to use this product as an aid to keep an eye on trailers, or backing
into a tight parking spot. Do not use this function for entertainment purposes.
• The object in rear view may appear closer or more distant than in reality.
• Please note that the edges of the rear view camera images may differ slightly according to whether
full screen images are displayed when backing, and whether the images are used for checking the
rear when the vehicle is moving forward.
15
Connecting the System
ENG/MASTER 96
Fuse resistor
5 m (16 ft. 5 in.)
Extension lead
(for reverse signal)
Connection method
Clamp the lead. 1. 2. Clamp firmly with
needle-nosed
pliers.
Hide-away unit
Rear view camera
RCA cable
(sold separately)
To video output
Connect to the rear view camera. Do not connect
to any other equipment.
Do not use other than the
supplied extension lead.
Brown
Note:
It is necessary to set to “CAMERA”
in “SETUP” when connecting the
rear view camera.
Note:
Note:
☞
See Page 11.
CRD4069-A_U_inst_001_031_US 10/25/05 10:58 Page 16