Connecting the power cord (2), Connecting the system – Pioneer AVIC-N3 Manuel d'utilisation

Page 12

Advertising
background image

Pink (CAR SPEED SIGNAL INPUT)

The mobile navigation system is connected here to detect the distance
the vehicle travels. Always connect the vehicle’s speed detection
circuit or the ND-PG1 speed pulse generator, sold separately. Failure
to make this connection will increase errors in the location display.

IMPROPER CONNECTION MAY RESULT IN SERIOUS
DAMAGE OR INJURY INCLUDING ELECTRICAL SHOCK,
AND INTERFERENCE WITH THE OPERATION OF THE
VEHICLE’S ANTILOCK BRAKING SYSTEM, AUTOMATIC
TRANSMISSION AND SPEEDOMETER INDICATION.

Light green

Used to detect the ON/OFF status of the parking brake. This lead
must be connected to the power supply side of the parking brake
switch. If this connection is made incorrectly or omitted, certain
functions of your navigation system will be unusable.

LIGHT GREEN LEAD AT POWER
CONNECTOR IS DESIGNED TO DETECT
PARKED STATUS AND MUST BE
CONNECTED TO THE POWER SUPPLY SIDE
OF THE PARKING BRAKE SWITCH.
IMPROPER CONNECTION OR USE OF THIS
LEAD MAY VIOLATE APPLICABLE LAW
AND MAY RESULT IN SERIOUS INJURY OR
DAMAGE.

11

Connecting the System

ENG/MASTER 96

<CRD4069A/U> 12

Connecting the power cord (2)

Note: The position of the speed
detection circuit depends on the
vehicle model. For details, consult
your authorized Pioneer dealer or
an installation professional.
If connection to the speed detec-
tion circuit is too difficult, connect
the separately sold ND-PG1 speed
pulse generator to the pink lead.

Note: The position of the parking
brake switch depends on the vehi-
cle model. For details, consult the
vehicle owner’s manual or dealer.

Connection method

Clamp the parking brake
switch power supply side
lead.

Clamp firmly with
needle-nosed pliers.

Power supply side

Ground side

Parking brake switch

Hide-away unit

Speed detection circuit lead

Vehicle injection
computer

Connector

Pass the extension cord
and the lead for the speed
detection circuit through
this hole.

Clamp firmly with
needle-nosed
pliers.

Close the cover.

Connection method

Extension lead
(for speed signal)

5 m (16 ft. 5 in.)

CRD4069-A_U_inst_001_031_US 10/25/05 10:58 Page 12

Advertising