LG 5550 - Manuel (Page 41)

78 79 LG5550 LG5550
Data Baud (Menu )
Allows you to set the port speed. Set the port speed
based on your carrier’s network. Contact your carrier to
determine the maximum available speed.
1. Press , , , .
2. Select 19200 bps / 115200 bps / 230400 bps
then press
.
Roaming (Menu )
Set Mode (Menu )
Allows you to set up the phone producer’s management
environment. Leave this setting as the default unless you
want to alter system selection as instructed by your
service provider.
1. Press , , , .
2. Select Automatic / Home Only / Digital Only / Analog
Only then press
.
Call Guard (Menu )
Call Guard reminds you when you are making or receiving
a roaming call and requires you to take additional steps
before placing or answering roaming calls.
1. Press , , , .
2. Select On / Off then press .
NOTE: When using the 1X HSPD data service via an RS-232C data
cable, the port speed is set to 115,200 (230,400 is not
supported). When using the 1X HSPD data service via a
USB data cable, you may get better port speed if the port
speed is set to 230,400 rather than 115,200.
Location (Menu )
Menu for GPS (Global Positioning System: Satellite
assisted location information system) mode.
1. Press , , .
2. Press key, then select On/Off.
3. Press key to save the setting.
Messaging (Menu )
With this feature on, new messages are directly
displayed, while with this feature off, just alerted when
new messages are received.
Display Pop-up (Menu )
When message receives, activate pop-up window. When
set on, pop-up window is displayed.
1. Press , , , .
2. Select On / Off then press .
Delivery Receipt (Menu )
1. Press , , , .
2. Select On / Off then press .
Msg Alerts (Menu )
Allows you to select the alert type for a new message.
1. Press , , , .
NOTE: GPS satellite signals are not always transmitted,
especially under bad atmospheric and environmental
conditions, indoors or otherwise.
Using Phone Menus Using Phone Menus
LG5550(E)-Bell.QXD 6/4/04 9:53 AM Page 78