Logitech Jabra BH970 - Manuel (Page 10)

BH970 Wireless Mono DECT Headset User’s Guide 10
2. Connecting
Launch the Interactive Setup Wizard Available from www.logitech.com/support/BH970
for Animated Setup Instructions
The easiest way to connect and configure the BH970 Headset is to use the Interactive Setup Wizard available from www.logitech.com/
support/BH970. Refer to the Important Information Guide for important safety instructions prior to installing and using
the BH970 Headset.
2.1 Connect to AC Power
Connect the Power Adapter to the Base
1. Plug the power adapter into the port marked
on the base.
2. Connect the power adapter to an AC outlet.
2.2 Dock the Headset
Dock the headset, as illustrated. When the headset is docked correctly the headset battery will begin charging, if needed.
Keep the headset docked while connecting the BH970 Headset, or when not in use.
2.3 Connect to PC
Connect a PC to the Base
You can connect the BH970 Headset solution to both a PC and a desk telephone.
1. Plug the supplied USB cable into the port marked
on the base.
2. Connect the USB cable to any free USB port on the PC.