KITCHENAID KGCV465 - Manuel (Page 6)

6
Dual Valve TripleTier™ Burner Control
To Set:
1. Push in and turn knob counterclockwise to LITE.
All surface burners will click. Only the simmer burner with
the control knob turned to LITE will produce a flame.
2. Turn knob anywhere between SIMMER BURNER HI and LO.
3. Push in and turn knob counterclockwise to POWER BURNER
HIGH. All three rings will produce a flame.
4. Turn knob anywhere between POWER BURNER HI and
POWER BURNER LO.
Use the following chart as a guide when setting heat levels.
Surface Burners
IMPORTANT: Do not obstruct the flow of combustion and
ventilation air around the burner grate edges. Before cleaning,
make sure all controls are off and the oven and cooktop are cool.
Do not use oven cleaners, bleach or rust removers.
Burner Cap Alignment
Always keep the burner cap in place when using a surface
burner. A clean burner cap will help prevent poor ignition and
uneven flames. Always clean the burner cap after a spillover and
routinely remove and clean the caps according to the “General
Cleaning” section.
Standard Burner
SETTING RECOMMENDED USE
LITE ■ Light the burner.
SIMMER BURNER HI ■ Cook soups, sauces and gravies.
■ Stew or steam foods.
SIMMER BURNER LO ■ Keep food warm.
■ Melt chocolate or butter.
■ Simmer.
POWER BURNER HI ■ Start food cooking.
■ Bring liquid to a boil.
■ WOK cooking.
POWER BURNER
MED ■ Hold a rapid boil.
■ Quickly brown or sear food.
POWER BURNER LO ■ Fry or sauté foods.
■ Hold a slow boil.
1. Burner cap
2. Burner base
3. Alignment pins
4. Igniter
5. Gas tube opening
1
2
4
5
3