Samsung DCB-H360R - Manuel (Page 7)

GB-11
DCB-H360R
GB
GB-10 D I G I T A L C A B L E R E C E I V E R
DCB-H360R
Connecting Your STB
Selecting the Resolution and the DTV Output Signal
You can select the appropriate video output for the connected TV or monitor mode.
To select the resolution:
● Select a resolution by using the RESOLUTION key on the
remote control and referring to the following table.
N No otte e : EXIT key at the front of the HD receiver also
operates as RESOLUTION key, when any OSD
is not displayed on the screen.
To select the video output signal:
● Select the output signal by using the VIDEO OUTPUT
key on the remote control and referring to the
following table.
RGB : Select the output signal by using the
VIDEO OUTPUT key on the remote control
referring to the following table.
YP B P R : Select YP B P R when the TV is connected to the
Component (YP B P R ) and HDMI output port
of the HD receiver.
Resolution and Video Output
N No otte e : Initial value is YP B P R (1080i resolution) mode.
Video Out Available Resolution Output Status
Composite 576i Always output.
Scart 576i Scart output can be selected between RGB and
Composite.
Component (YP B P R ) 1080i/720p/576p The 576i resolution is not supported.
HDMI 1080i/720p/576p The 576i resolution is not supported.
Enter the manufacturer number into the remote control to control the TV with the remote control (see
“Available TV Manufacturer Numbers” on pages 32~37).
1. Turn the TV on.
2. Point the remote control towards the TV.
3. Enter the TV manufacturer number by using the NUMERICAL keys while pressing the TV key.
E.g. For a Samsung TV, press 0, 0 and 1 in this order by using the NUMERICAL keys while
pressing the TV key.
4. When the TV is turned off or on, the configuration is finished.
Button key Function
TV STANDBY/ON
INPUT SEL
VOL+/-
CH /
MUTE
0~9
Press to turn the TV on or off.
Press to select an external input source for the TV.
Press to adjust the TV volume / Exclusive to the TV
Press to select a TV channel.
Press to mute the TV sound.
Press to select TV channel.
TV functions that you can control with the remote control
N No otte e : 1. There is a model that can only be turned on by pressing the numeric key ‘0’ on
the remote control.
2. TV models of other manufacturer that can be controlled with the remote control
are limited, and some functions may not work.
3. If you replace the remote control batteries or enter a new manufacturer number,
the previously configured TV manufacturer number is deleted.
4. When a connected device is an integrated TV model (VCR, DVDP), take care
when using the remote control because it may operate both of them
simultaneously.
5. If the configuration number does not work, try another number.
Setting Up TV Operations with the Remote Control
Connecting Your STB
DCB_H360R draft 0604 eng 06/4/06 07:39 Page 10