Self-diagnosis display – Sony DSR-V10 Manuel d'utilisation

Page 62

Advertising
background image

62

Cause and/or corrective actions

• Moisture condensation has occurred.

m Remove the cassette and leave the VCR for at least 1 hour. (p. 53)

• The video heads are dirty.

m Clean the heads using the Sony DVM12CL cleaning cassette (not

supplied). (p. 54)

• You are using a battery pack that is not an “InfoLITHIUM” battery

pack.
m Use an “InfoLITHIUM” battery pack. (p. 51)

• A servicable situation not malfunctioned above has occurred.

m Remove the cassette and insert it again, then operate the VCR.

(p. 12)

m Disconnect the power cord of the AC adaptor/charger or remove

the battery pack. After reconnecting the power source, operate
the VCR.

• A VCR malfunction which you cannot service has occurred.

m Contact your Sony dealer or local authorized Sony service facility

and inform them of the five digits. (example: E:61:10)

Self-diagnosis display

LCD screen

Self-diagnosis display
•C:ππ:ππ

You can service the VCR yourself.

•E:ππ:ππ

Contact your Sony dealer or local
authorized Sony service facility.

The VCR has a self-diagnosis display.
This function displays the VCR’s condition with
five digits (a combination of a letter and figures)
on the LCD screen. If this occurs, check the
following code chart. The five-digit display
informs you of the VCR’s current condition. The
last two digits (indicated by ππ) will differ
depending on the state of the VCR.

C : 2 1 : 0 0

40min

53min

DVCAM

Five-digit display

C:21:ππ

C:22:ππ

C:23:ππ

C:31:ππ
C:32:ππ

E:61:ππ
E:62:ππ

If you are unable to resolve the problem, contact your Sony dealer or local authorized Sony service
facility.

Advertising