Additional information, Precautions, Registering an equalizer curve onto each disc – Sony XDP-210EQ Manuel d'utilisation

Page 8

Advertising
background image

8

Actual total number:

Sony XDP-210EQ (E) 3-856-153-12 (1)

EN

Additional
Information

Precautions

•If your car was parked in direct sunlight

resulting in a considerable rise in
temperature inside the car, allow the unit to
cool off before switching on.

•If no power is being supplied to the unit,

check the connections first. If everything is in
order, check the fuse.

•For safety reasons, keep your car audio

volume moderate so that you can still hear
sounds outside your car.

•If you connect this unit to the XDP-U50D,

this unit will not work.

If you have any questions or problems
concerning your unit that are not covered in
this manual, please consult your nearest Sony
dealer.

Fuse replacement

If the fuse blows, check the power connection
and replace the fuse. If the fuse blows again
after replacement, there may be an internal
malfunction. In such a case, consult your
nearest Sony dealer.

Warning
When replacing the fuse, be sure to use one
matching the amperage stated above the fuse
holder. Never use a fuse with an amperage
rating exceeding the one supplied with the
unit as this could damage the unit.

Registering an equalizer
curve onto each disc

— Disc Sound Memory (DSM)
(CD/MD changer or CD/MD player with
program memory function)

Once you have registered the desired equalizer
curve and the sound characteristics (bass,
treble and subwoofer level) onto the discs, you
can enjoy the same equalizer curve every time
you play them. You can register up to 200
discs.

1

Play the desired disc.

2

Select the equalizer curve, and adjust the
sound characteristics.

3

Press (SHIFT), then press (3) (PLAY
MODE) repeatedly until “DSM SET”
appears.

4

Press (5) (ENTER) momentarily.

When the DSM setting is complete, the
display will go back to the normal playback
mode.

Changing the stored equalizer
curve

Play the disc whose equalizer curve you want
to change, and follow the “Setting and storing
the equalizer curve”.

Erasing the stored equalizer curve

1

Press (SHIFT), then press (3) (PLAY
MODE) repeatedly until “DSM SET”
appears.

2

Press (5) (ENTER) for two seconds.

CD1

SCHUBERT

DSM set

SUR EQ

DSM

+Enter+

SUR EQ

DSM

+Delete+

SUR EQ

Fuse (5 A)

Advertising