Troubleshooting, Specifications – Sony XE370 Manuel d'utilisation

Page 18

Advertising
background image

18

GB

Troubleshooting

If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help you remedy the
problem. Should any problem persist, consult
your nearest Sony dealer.

There’s no sound.

• Check that the player is connected securely.

• Make sure you operate the amplifier correctly.

• Adjust the analog output level with ANALOG

OUT LEVEL +/– on the remote (CDP-XE570/
XE370 only).

The CD does not play.

• There’s no CD inside the player. “– NO DISC –”

(or “no dISC” for the CDP-XE370/XE270)
appears. Insert a CD.

• Place the CD with the label side up on the disc

tray correctly.

• Clean the CD (see page 17).

• Moisture has condensed inside the player.

Remove the disc and leave the player turned on
for about an hour.

The recording level has changed.

• The recording level changes if you adjust the

analog output level with ANALOG OUT
LEVEL +/– on the remote during recording
(CDP-XE570/XE370 only).

The remote does not function
(CDP-XE570/XE370 only).

• Remove the obstacles in the path of the remote

and the player.

• Point the remote at the remote sensor

on the

player.

• Replace all the batteries in the remote with new

ones if they are weak.

Specifications

Compact disc player

Laser

Semiconductor laser (

λ

=

780 nm)
Emission duration:
continuous

Frequency response

2 Hz to 20 kHz ± 0.5 dB

Dynamic range

More than 93 dB

Harmonic distortion

0.0045%

Outputs

ANALOG
OUT

DIGITAL
OUT
(OPTICAL)

PHONES
(CDP-XE570
only)

General

Power requirements
Canadian models:

120 V AC, 60 Hz

European models:

230 V AC, 50/60 Hz

Power consumption

11 W

Dimensions (approx.)

430 x 95 x 290 mm

(w/h/d)

incl. projecting parts

Mass (approx.)

CDP-XE570: 3.3 kg
CDP-XE370: 3.2 kg
CDP-XE270: 3.2 kg

Supplied accessories

Audio cord (2 phono plugs – 2 phono plugs) (1)
Remote commander (remote) (1) (CDP-XE570/
XE370 only)
R6 (size AA) batteries (2) (CDP-XE570/XE370 only)

Design and specifications are subject to change
without notice.

Load
impedance

Over 10
kilohms

Wave length:
660 nm

32 ohms

Jack
type

Phono
jacks

Optical
output
connector

Stereo
phone
jack

Maximum
output level

2 V
(at 50
kilohms)

–18 dBm

10 mW

Advertising
Ce manuel est liée aux produits suivants: