Preparation, Filter installation, Inserting batteries in the remote control – Sharp FP-N40CX Manuel d'utilisation

Page 12: Filters removal

Advertising
background image

1

1

2

2

1

PREPARATION

To maintain the quality of the filters, they are placed in the main unit within plastic bags.
Be sure to remove the filters from the plastic bags before using the unit.

1

Filters Removal

1

Place the unit facing up

Lay the unit on a flat surface such as a table,
making sure that the stand does not contact the
surface.

3

Remove the Pre-Filter, and then re-
move the Washable Active Carbon Fil-
ter (black) and True HEPA Filter (white)
from the plastic bags.

The Washable Active Carbon Filter is reinforced
with cardboard to prevent it losing its shape.

Battery Information

• The batteries for this remote control are for ini-

tial use only . Change the batteries when nec-
essary.

• Incorrect usage of the batteries may cause bat-

tery fluid leakage and/or damage.
Take care of the following when handling:

• When replacing the batteries, replace both bat-

teries with new ones of the same type. (Use 2
AA manganese batteries.)

• When not using the unit or remote control for

an extended period, remove the batteries. (This
prevents malfunction of the remote control from
battery fluid leakage.)

• The batteries of the accessory are for initial use

only and may be depleted within 1 year.

E-10

Be sure to remove the power plug from the wall outlet.

FILTER INSTALLATION

2

Remove the Front Panel

Press in the hook on the bottom
of the Front Panel and lift to re-
move.

Soft cloth

Table, etc.

Washable Active Carbon Filter

INSERTING BATTERIES IN THE REMOTE CONTROL

1

Remove the
back cover

Press and slide the
back cover to re-
move.

2

Insert batteries

Insert batteries with

and

as shown

below.

3

Close the back
cover

Front Panel

Hook

Place so that
stand does not
touch surface.

Pre-Filter

Advertising