If the paper jams – Sony UP-DP10 Manuel d'utilisation

Page 33

Advertising
background image

33

If the Paper Jams

If the paper jams while the printer is printing, the
ALARM lamp will light. Press the Operation
switch to turn the printer off, and then press the
Operation switch to turn the printer on again.
The paper inside the printer will be ejected
automatically.
If this procedure does not clear the paper jam and
the ALARM lamp remains lit, follow the
procedure described below to remove the
jammed paper.

1

Turn the printer off and unplug the power
cord.

2

If there are any printed sheets in the paper
supply/eject tray, remove those sheets, and
then remove the tray.

Printer status and action

a

• There is a paper jam inside

the printer.

t

Remove the jammed

paper. (see below)

• The ink ribbon has broken.

t

Repair the ink ribbon

with cellophane
tape. (page 34)

a

• The ribbon cartridge cover

is open.

t

Close the cover.

• The bottom cover is open.

t

Close the cover.

Lit

Lamp

ALARM

Flashing

All
lamps

a

• A problem has occurred

that requires repair by
service personnel.

t

Contact your dealer

or the nearest Sony
Service Center.

3

Open the ribbon cartridge cover, and remove
the ink ribbon cartridge.

Note

If you cannot remove the ink ribbon
cartridge, contact your dealer or the nearest
Sony Service Center.

4

Remove the jammed paper.

• If you cannot remove the jammed paper, or

if you cannot see the jammed paper, follow
the procedure described below.

• If you were able to completely remove all

of the jammed paper, skip ahead to step 7.

5

Remove the bottom cover by pressing on the
marks and then sliding the cover down.

Advertising