Miscellaneous 32, Status indications – Sony UP-DP10 Manuel d'utilisation

Page 32

Advertising
background image

Miscellaneous

32

Status Indications

The printer status is indicated by the POWER,
PRINT, PAPER, RIBBON, and ALARM lamps
lighting or flashing. If the printer is in an
abnormal condition, take whatever action is
called for by the status indicated by the lamps.

• Check whether paper has jammed.

t

Clear the jam as explained

in “If the Paper Jams”
(page 33).

• Check whether the ink ribbon has

broken.

t

Correct the problem as

explained in “If the Ink
Ribbon Breaks” (page 34).

Symptom

Paper
jams

The
ALARM
lamp is lit

Cause/Remedy

• Check whether you have loaded

more than 25 sheets of paper in the
paper supply/eject tray.

t

Load no more than 25

sheets of paper in the paper
supply/eject tray at a time.

• Check whether more than 10

sheets of paper have accumulated
on the eject surface of the paper
supply/eject tray.

t

Do not allow more than 10

sheets of paper to
accumulate on the eject
surface.

• Check whether the paper is

wrinkled or curled.

t

Remove any wrinkled or

curled paper.

The
printed
result
does not
look
clean.

• Check whether you are printing on

the right side of the paper.

t

Properly load the printing

paper as explained in
“Loading the Printing Paper”
(page 17)

• Check whether the ink ribbon

cartridge or printing paper are dirty.

t

Load a new ink ribbon

cartridge or clean printing
paper.

Printer status and action

a

• The power is on.

a

• Printing is in progress.

Lit

Lamp

POWER

Flashing

PRINT

a

• The printer is receiving

image data.

PAPER

a

• The printer is out of paper.

t

Load more paper in

the paper supply/
eject tray. (page 17)

• There is too much

accumulated ejected paper
in the paper supply/eject
tray.

t

Remove the

accumulated ejected
paper from the paper
supply/eject tray.

• The printer cannot use the

type of paper that has been
loaded.

t

Once the paper has

been ejected, load
the correct type of
paper in the paper
supply/eject tray.
(pages 14, 17)

RIBBON

a

• The end of the ink ribbon

has been reached.

t

Install a new ink

ribbon cartridge.
(pages 16, 19)

• No ink ribbon cartridge has

been installed.

t

Install an ink ribbon

cartridge. (page 16)

• The ink ribbon cartridge that

has been installed is not
compatible with this printer.

t

Install the correct ink

ribbon cartridge.
(pages 14, 16)

Advertising