Sony UP-DP10 - Manuel (Page 14)

14
Preparing to Print
Preparing a Print Pack
In order to print, it is necessary to prepare a Sony Print Pack (printing paper
and an ink ribbon cartridge, sold as a set). A Sony Print Pack must be
purchased separately. The following table lists the types of Sony Print Packs
available.
Note
If “Border” is selected in the printer driver, each of the print sizes will be
reduced somewhat.
Notes on Using Print Packs
• The ink ribbon cartridge is designed to allow you to print an image on each
of the sheets in the Print Pack.
• If photos taken with a digital camera that has a 3:4 aspect ratio (V:H) are
printed on the paper in a UPC-10P23 Print Pack, a white border may remain
even after cutting along the left and right perforations, or a portion of the
top and bottom of the image may not be printed on the paper.
Features
Photocards These sheets produce prints that
have no white border when
photos taken with a digital camera
that has a 2:3 aspect ratio (V:H)
are printed on these sheets and
the border is then cut off along
the perforations.
Photocards These sheets produce prints that
have no white border when
photos taken with a digital camera
that has a 3:4 aspect ratio (V:H)
are printed on these sheets and
the border is then cut off along
the perforations.
Type Product No.
UPC-
10P23
Size/number of sheets
100
×
180 mm
(100
×
152 mm
after cutting)
25 sheets
UPC-
10P34 100
×
180 mm
(100
×
134 mm
after cutting)
25 sheets
UPC-
10S01 Glossy
photostickers 100
×
180 mm
25 sheets
These sheets have no
perforations, and are backed with
an adhesive.
The maximum printing area is 100
×
155 mm.