Samsung AK68-01770G - Manuel (Page 16)

connections
16_ connections
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier you have connected. (See pages 48 to
49)
- The position of jacks may vary depending on the Amplifier. Please refer to the user's manual of the
Amplifier.
Connecting to an Audio System (Dolby Digital, MPEG2 or DTS Amplifier)
1
If using a Coaxial cable, connect the DIGITAL AUDIO
OUT (COAXIAL) jack on the rear of the DVD player to
the DIGITAL AUDIO IN (COAXIAL) jack of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO,
COMPONENT jacks on the rear of the DVD player to the
VIDEO, COMPONENT jacks of your TV as described on
pages 12 to 14.
3
Turn on your DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select the
audio input your DVD player is connected to in order to
hear sound.
Refer to your Amplifier's user manual to set the
Amplifier's audio input.
Coaxial Cable