Samsung AK68-01770G - Manuel (Page 12)

connections
12_ connections
Choosing a Connection
The following shows examples of connections commonly used to connect the DVD player with a TV and
other components.
Before Connecting the DVD Player
- Always turn off the DVD player, TV, and other devices before you connect or disconnect any cables.
- Refer to the user’s manual of the additional devices (such as a TV) you are connecting formore
information on those particular devices.
Connecting to a TV (Progressive)
- Connecting to your TV using Component video cables.
- You will enjoy high quality and accurate color reproduction images. Component video separates the
picture element into black and white(Y), blue (PB), red (PR) signals to present clear and clean images.
(Audio signals are delivered through the audio output).
1
Using Component video cables, connect the
COMPONENT VIDEO OUT jacks on the rear of the DVD
player to the COMPONENT IN jacks of your TV.
To see the progressive video output,
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is
supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.
- Depending on your TV, the connection method may differ from the illustration above.
2
Using the audio cables, connect the AUDIO (red and
white) OUT jacks on the rear of the DVD player to the
AUDIO (red and white) IN jacks of your TV.
Turn on the DVD player and TV.
4
Set the Video Output to P-SCAN (480p) in the display
Setup menu (See pages 50-51)
3
Press the input selector button on your TV remote control
until the Component signal from the DVD player appears
on the TV screen.
RED
WHITE
RED WHITE RED BLUE GREEN
RED
BLUE GREEN
Audio Cable
Component cable