Jenn-Air W10253462A - Manuel (Page 23)

23
For direct-wired ranges:
1. Disconnect power.
2. Disconnect range from downdraft vent system.
3. Slide range forward.
4. Complete cleaning or maintenance.
5. To check that anti-tip bracket is installed, remove access
panel and use a flashlight and look underneath the bottom of
the range:
■ Look for the anti-tip bracket securely attached to floor or
wall.
■ Slide range back so rear range foot is under anti-tip
bracket.
6. Check that range is level.
7. Reconnect range to downdraft vent system.
8. Reconnect power.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.