Oven use, Aluminum foil, Positioning racks and bakeware – Jenn-Air PRO-STYLE JGRP548 Manuel d'utilisation

Page 17: Extendable roller rack

Advertising
background image

17

OVEN USE

Odors and smoke are normal when the oven is used the first few
times, or when it is heavily soiled.

During oven use, the heating elements will not remain on, but will
cycle on and off throughout oven operation.

IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off. Exposure to the fumes may result in death to
certain birds. Always move birds to another closed and well-
ventilated room.

Aluminum Foil

IMPORTANT: To avoid permanent damage to the oven bottom
finish, do not line the oven bottom with any type of foil or liner.

For best cooking results, do not cover entire rack with foil
because air must be able to move freely.

To catch spills, place foil on rack below dish. Make sure foil is
at least ½" (1.3 cm) larger than the dish and that it is turned
up at the edges.

Positioning Racks and Bakeware

IMPORTANT: To avoid permanent damage to the porcelain
finish, do not place food or bakeware directly on the oven door or
bottom.

RACKS

Position racks before turning on the oven.

Do not position racks with bakeware on them.

Make sure racks are level.

BAKEWARE

To cook food evenly, hot air must be able to circulate. Allow
2" (5.0 cm) of space around bakeware and oven walls.

Extendable Roller Rack

The extendable roller rack allows easy access to position and
remove food in the oven. It can be used in rack positions 1
through 4. The extendable roller rack will not fit in position 5.

Open Position

Closed and Engaged Position

To Remove the Extendable Roller Rack:

1. Slide the rack in completely so that it is closed and engaged

with the sliding shelf.

2. Using 2 hands, lift up on the front edge of the rack and the

sliding shelf together. Slowly push both to the back wall of the
oven so the front edge of the sliding shelf sits on the rack
guide located on the sides of the oven.

The front edge of the rack and the sliding shelf should be
higher than the back edge.

3. Using 2 hands, lift up the back of the rack and the sliding

shelf so that the back and front are level on the rack guide.

4. Pull the rack and the sliding shelf out.

A. Extendable roller rack
B. Sliding shelf

1

2

3

4

5

A

B

A. Extendable roller rack
B. Sliding shelf

A. Sliding shelf
B. Rack guide

C. Extendable roller rack

A

B

B

A

C

Advertising
Ce manuel est liée aux produits suivants: