JVC MX-KC45 - Manuel (Page 26)

23
Using the Timers
En
glish
On the Unit
You can set the time in the same way as for setting the Daily Tim-
er.
1 Insert a blank or erasable tape into the Deck
B and wind past the tape leader.
2 Press the CLOCK/TIMER button until “ON
TIME” immediately after “REC” appears on
the display.
Each time you press the button, the display changes as follows:
DAILY
= ON TIME = REC = ON TIME* = Clock setting
display
= Canceled = (back to the beginning)
*: This item should be selected for the REC Timer setting.
Then, the System enters ON-time setting mode. The current
ON time appears on the display and the hour digits blink.
3 Setting the ON time you want the System to
turn on.
1. Press the
4 or ¢ button to set the hour, then press the
SET button.
2. Press the
4 or ¢ button to set the minute, then press the
SET button.
“OFF TIME” appears and then the System enters OFF-time
setting mode. The current OFF time appears on the display,
and the hour digits blink.
4 Setting the OFF time you want the System to
turn off.
1. Press the
4 or ¢ button to set the hour, then press the
SET button.
2. Press the
4 or ¢ button to set the minute, then press the
SET button.
The System enters Preset Station Entering mode.
5 Select the preset station for recording.
1. Press the
4 or ¢ button to set the band (TUNER FM or
TUNER AM), then press the SET button.
2. Press the
4 or ¢ button to set the preset number, then
press the SET button.
When “P---” is selected, the last station you were listening to
will be set.
6 Setting the volume level.
Press the
¢ or 4 button to select the volume level.
MIN, 1-30, or MAX: When the timer is turned on, the Volume
will be automatically set to the selected level.
7 Press the SET button.
The timer setting is completed and the display returns to the
display before you set the Timer.
8 Press the STANDBY/ON button to turn
off the System, if necessary.
The Timer indicator ( ) and “REC” indicator are lit on the
display, showing that the Rec Timer is set to on.
To confirm / change the timer setting, repeat the setting pro-
cedure from the beginning.
When the timer ON-time comes:
• When the timer ON-time comes, the System automatically
turns on. The station you have set is played. The Timer indica-
tor (
) and Tape indicator (
3) blink, and the “REC” indicator
lights during timer operation.
To stop timer recording, press the
7 button.
• When the timer OFF-time comes, the System automatically turns
off.
• If the System is already on when the timer ON-time
comes, the REC Timer does not work.
To cancel the REC Timer temporarily:
1 Press the CLOCK/TIMER button on the Unit
repeatedly until “REC” appears on the dis-
play.
2 Press the CANCEL button on the Unit.
“OFF” appears and both the Timer indicator ( ) and the
“REC” indicator go out.
To activate the cancelled REC Timer:
1 Press the CLOCK/TIMER button on the Unit
repeatedly until “REC” appears on the dis-
play.
The Timer indicator ( ) lights and the “REC” indicator
blinks on the display.
2 Press the SET button on the Unit.
“REC SET” appears on the display. The Timer indicator ( )
and the “REC” indicator remain lit, and the display returns to
the original display.
• If the System is unplugged, or a power failure occurs,
the timer setting will be lost in a few days. You will
need to reset the clock first, then the timer.
MX-KC45(C).book Page 23 Wednesday, January 11, 2006 2:32 PM