John Deere HR-2700GH - Manuel (Page 30)

0 AC-Series Operator’s Manual-E/F
sPeCifiCaTiOns
iTeM Model hr-2500gh Model hr-2700gh
Operating Pressure 500 PSI 700 PSI
Measured at Pump Manifold ......... (7 Bar) (86 Bar)
Measured at discharge 750-900 PSI 000-50 PSI
Hose Outlet ................................... (- Bar) (5-55 Bar)
Relief Pressure (Measured at 00-600 PSI 400-800 PSI
Discharge Hose Outlet) ................ (5-79 Bar) (65-9 Bar)
Inlet Water Supply (Minimum) ...... .0 GPM .0 GPM
(.4 L/min) (.4 L/min)
Pump Flow .................................... . GPM . GPM
(8.7 L/min) (8.7 L/min)
Pump Oil Capacity ........................ 4.5 oz. 4.5 oz.
(0.4 qt., 0. L) (0.4 qt., 0.L)
Nozzle Size Code ......................... .0 .0
Engine .......................................... Honda Honda
Model .................................... GC60 GC90
Horsepower .......................... 5.0 6.0
Spark Plug ............................ BPR6ES (NGK) BPR6ES (NGK)
Plug Gap ............................... 0.08-0.0 in. 0.08-0.0 in.
(0.70-0.80 mm) (0.70-0.80 mm)
Engine Oil Capacity ...................... 0.6 qt. (0.6L) 0.6 qt. (0.6L)
Fuel Tank Capacity ....................... 0.46 gal. (.7L) 0.46 gal. (.7L)
reCOrd serial nuMber
Write you model number, machine serial number and date
of purchase in the spaces provided below. Your dealer
needs this information when ordering parts.
NOTE: Serial number is located on the right side of vertical
face of base plate at front of pump. (Near base of
handle.)
Model No. ______________________________________________
Machine Serial No. _______________________________________
Date of Purchase ________________________________________
(To be filled in by purchaser)
PRESSURE WASHER
Made in U.S.A.
34-0075
MAX. GPM MAX. PSI NOZZLE SIZE
H.P. CODE
MODEL NO.
Specifications