Jensen JDV8035 - Manuel (Page 14)

JDV8035
14
Middle
To adjust Mid-Range options, press the rotary
encoder (4) repeatedly until “Middle” appears in
the display. Continue pressing the rotary
encoder to access the following Mid-Range
settings:
•
LEVEL
Turn the rotary encoder clockwise to
increase or counter-clockwise to decrease
the Mid-Range level from “-6” to “+6”. “00”
represents a flat response.
• Mid-Range Center Frequency (C.Frq)
Turn the rotary encoder to adjust the Mid-
Range Center Frequency to 500Hz, 1KHz,
1.5KHz, or 2.5KHz.
• Mid-Range Quality Factor (BassQ)
Turn the rotary encoder to select one of the
following Mid-Range Quality Factor
options: 2N, 1N, 1W, 2W. The following
chart depicts the curve characteristics for
each step: Treble
To adjust Treble options, press the rotary
encoder (4) repeatedly until “TREBLE” appears
in the display. Continue pressing the rotary
encoder to access the following Treble settings:
•
LEVEL
Turn the rotary encoder clockwise to
increase or counter-clockwise to decrease
the Treble level from “-6” to “+6”. “00”
represents a flat response.
• Treble Center Frequency (Freq)
Turn the rotary encoder clockwise to adjust
the Treble Center Frequency to 10KHz,
12.5KHz, 15KHz or 17.5KHz.
Bass Quality Factor Curve Characteristics
Middle Quality Factor Curve Characteristics
JDV8035 2 ZONE
2
1
4
6
5 7
3 8 9 10 11
12
13
14
15 16 17
18 19
20
21
22