John Deere TY25862 - Manuel (Page 32)

Troubleshooting
OUOD006,0000008 –19–09JUN04–1/1
Troubleshooting Battery Charger
Symptom Problem
Solution
No meter reading. (AC cord Clamps not making good connection. Rock or twist clamps back and forth
unplugged.) to improve connection.
Battery voltage is too low. Plug AC cord into outlet.
Charger will not turn on when AC outlet is dead. Check for voltage at outlet.
properly connected.
Use a different outlet.
Poor electrical connection. Check connections.
Rock or twist clamps back and forth
for better connection.
Charger makes clicking noise. Circuit breaker is cycling. Check switch position.
Battery is defective. Check battery.
Battery is severely discharged . Continue charging until battery can
take a charge. If problem continues
for 20 minutes, stop charging and
have battery checked.
Battery connections are reversed. Shut off charger and correct lead
connections.
20-1
091604
PN=32