On-screen options and settings – Maytag W10254443A Manuel d'utilisation

Page 6

Advertising
background image

6

ON-SCREEN OPTIONS AND SETTINGS

Many of the settings and options for each cycle are included in

the on-screen display, and can be selected or adjusted once you

have selected the wash cycle with the cycle knob.
NOTE: That not all options or settings are available with all

cycles, and some may not be used together.

SPIN SPEED

This washer automatically selects the spin speed based on the

cycle selected. Preset speeds can be changed.

n

Faster spin speeds mean shorter dry times, but may increase

wrinkling in your load.

n

Slower spin speeds reduce wrinkling, but will leave

your load more damp.

DELAY START

Delay the start of the wash cycle up to 16 hours.

PRETREAT

Prewash

Use Prewash with loads of heavily soiled items. Prewash will

add additional time to the main cycle.

Autosoak

Autosoak is helpful in removing small spots of set-in stains

from fabrics. It tumbles the load briefly for even distribution,

then provides an extended cold or warm water soak without

drum movement to help loosen tough stains.

RINSE

Normal

Standard rinse is default on most cycles. See the “Cycle

Guide” for available Wash/Rinse temperature options.

Extra

Provides an extra rinse to thoroughly flush out bleach or

allergens. Extra rinse is default on the Whites cycle and

some Specialty Cycles. It can be added to most other

cycles by selecting the Extra option.

Ultra

Ultra provides two additional rinses to a cycle. Ultra may

be selected for all cycles located around the dial with the

exception of Drain & Spin and Clean Washer. It may also be

added to the Stuffed Animals and Pillows Specialty Cycles.

MAX EXTRACT

Max Extract

uses an extended high-speed spin to

remove additional water during the spin. This helps to

reduce drying times.

To adjust settings, use the selection button beneath the desired

option. If the screen shows the multiple page symbol

,

press the or button to display additional options.

Then press the or button until the desired setting for that

option is in the center of the display and press the center

selection button to select.

TEMPERATURE

The recommended wash temperature is preset for each cycle.

You may also select a wash temperature based on the type of

fabric and soils being washed. For best results, use the warmest

wash water safe for your fabric, following the garment label

instructions. All wash temperatures feature a cold rinse, except

Warm/Warm, which has a warm wash and a warm rinse.

SOIL LEVEL

Soil level is preset for each wash cycle. For most loads, use the

soil level that is preset with the cycle you have chosen.
Press the or button to adjust the Soil Level to the desired

setting. Different Soil Level settings may increase or decrease the

cycle time shown in the Estimated Time Remaining display.

Advertising
Ce manuel est liée aux produits suivants: