Maytag W10254443A - Manuel (Page 13)

13
The display will show the default settings for the selected
cycle. If desired, press the button beneath each setting to
adjust the Temperature, Soil Level, and Spin Speed, and
to add options such as an additional Rinse. Use the
and arrow keys to page to additional options. For more
information on a cycle, press LEARN MORE.
NOTE: Not all settings are available on all cycles. See “Cycle
Guide” for available settings.
9.
Adjust settings (if desired)
10.
Select any additional options
Press the FRESH HOLD ® option button or STEAM FOR
STAINS button to add these options to the selected cycle.
If Fresh Hold
® option is selected, the washer will automatically
activate the vent fan and tumble the load at the end of the
wash cycle for up to 16 hours. This is useful if you are unable
to remove a load immediately after the cycle has finished.
Steam for Stains can be used with most cycles to provide a
steam boost for added cleaning power. See the “Cycle Guide”
for cycles that allow the Steam for Stains option.
NOTE: Not all options are available with all cycles or settings.
11.
Setting a delayed start (if desired)
If you do not want to begin a cycle immediately, you may
choose the DELAY START option. This will delay the start
of the wash cycle by up to 16 hours.
To set a Delay Start:
1. Select the Delay Start option using the LCD control buttons.
Use the and buttons to increase or decrease the delay
time. Press OK to set the delay.
2. To begin the delay countdown, press START/PAUSE.
The delay countdown has started when the countdown
screen is displayed.
IMPORTANT: If you are using the Delay Wash option, use of the
dispenser cartridge is recommended. Powdered detergent may
be used in the HE powdered detergent compartment.
whites
heavy duty
delicate
rinse/drain
& spin
small
load
with
clean
washer
bedding
wrinkle control
allergen
normal
handwash
specialty
cycles
8.
Select CYCLE
Turn cycle knob to choose your wash cycle. The cycle name
and options will appear in the display.
See “Cycle Guide” for details on cycle features, or press LEARN
MORE. Not all options and settings are available on all cycles.
When selecting Specialty Cycles, refer to the LCD display for
additional options and settings. For more information on using
Specialty Cycles. Press the LEARN MORE function on your
washer.