GE PROFILE DPGT650 - Manuel (Page 32)

Installation Instructions
32
REVERSE HANDLE
REVERSING THE DOOR SWING (cont.)
Install the handle on the opposite side of
the door.
5
REMOVE HINGES AND REHANG DOOR
Remove the hinges from the door and install them
on the opposite side with the hinge pin toward the
outside of the door.
6
REMOVE HINGES AND REHANG DOOR
(cont.)
Insert the door on the opposite side of the opening
by moving the door IN and DOWN until the top
hinge and the bottom hinge are resting on the
top screws inserted in Step 2.
6
Remove the remaining screws from the side of the
opening from which the door was removed. With
these screws, secure each hinge at the bottom.
Rear of Door
Opposite Side
of Door
Tighten the two top screws of each hinge. Reinsert
the plastic plugs on the side from which the door
was removed.