GE Monogram ZBD5600 - Manuel (Page 13)

13
Loading the Racks
Dishwasher
Upper Rack The upper rack is for glasses, cups and saucers. Cups
and glasses fit best along the sides. This is also a secure
place for dishwasher-safe plastics.
The cup shelf may be placed in the up or down position
to add flexibility. The cup shelf can also secure wine
glasses at an angle for best washability. Because wine
glasses come in various sizes, after loading, slowly push
in the rack to make sure they will clear the top of the
dishwasher.
The upper rack is also fitted with an adjustable glass
support wire which can be positioned to secure tall
glasses or fold down to fit larger items over it. You
may need to change the height of the upper rack,
depending on how tall your load is.
The upper rack is good for all kinds of oddly-shaped
utensils. Saucepans, mixing bowls and other items
should be placed face down.
Secure larger dishwasher-safe plastic items over two
fingers when possible.
Make sure small plastic items are secure so they can’t
fall onto the heating element.
Upper
Wash
Tower Take care not to obstruct the rotation of the
spray arm under the upper rack or cover the
water collector in the center of the upper rack.
Adjustable glass
support wire
Fold down cup rack
can support extra cup
Fold down cup rack can
support glass stems
Squeeze and lift peg
from rack runner
Re-adjust
upper rack
Adjusting
Upper Rack
Height The upper rack can be raised or lowered to
provide extra room for different sized items.
Empty the upper rack. Remove the rail pegs
in the front of the rack runners by squeezing
and lifting the top of the peg, then slide the
rack out. Re-insert the rack in the chosen position and
replace the pegs. Check that the spray arm is
free to rotate.