Elmo TT-02S - Manuel (Page 30)

30
English
OPERA
TION
PR
OCEDURE
Note
• An SD card set in this product cannot be saved, deleted, locked, unlocked, and
formatted with image data from the PC.
• The image data cannot be recorded with the correct date and time.
• When the front operating panel is in operation, do not connect/disconnect the USB
cable, or malfunction will be caused to this product.
• Do not switch [USB Mode] on the OSD when this product is in USB-connection.
• The USB2.0 compliant cable is recommended.
• Depending on the USB environment used by the PC or the USB2.0 compliant cable
peripheral units, the image transfer could be disturbed.
• This does not guarantee operations in any environment.
• When [USB Mode] has been set to [Mass Storage] and a USB cable has been
connected to the PC, an SD card cannot be deleted, locked, unlocked, formatted, and
saved with image data by operating the main unit.
(3) This product is recognized as a removable disk. You can view the image data in an SD on
the viewer software for the PC.
The image data are stored in JPEG format in the following folders:
My Computer
DCIM
Removable disk
100_ELMO
IMAG0001.JPG
IMAG0002.JPG