Elmo TT-02S - Manuel (Page 12)

12
English
PA
R
T
NAMES AND FUNCTIONS
(5)
(6)
(4)
(3)
(2)
(1)
Rear Panel
Name Function
(1) DC IN 12V
(Power Socket)
Plug-in for the AC adapter
(2) RGB OUT
(Analog RGB
Output Terminal)
To output analog video signal to the projector, the PC
monitor or other RGB input device.
P.20
(3) RGB IN
(Analog RGB
Input Terminal)
To output the image input to this terminal, when [PC] is
selected by Image select button.
P.20
(4) VIDEO OUT
(Composite Video
Output Terminal)
To output image from the RCA pin-jack terminal to the
NTSC/PAL-system monitor (e.g., TV monitor)
P.21
(5) OUTPUT
(DIP Switch)
To switch the following:
Left key : Output terminal
Right key : VIDEO output system
• When switching the DIP switch key settings, be
sure to turn OFF the power switch of the main unit.
Switching the DIP switch key with the power switch of
the main unit ON does not switch the output image.
• Either one of [RGB OUT] or [VIDEO OUT] images
can be output. (Unable to simultaneously output both
of [RGB OUT] and [VIDEO OUT] images)
• When the left key is set to [VIDEO], the image input
to [RGB IN] can not be output.(Unable to operate
the [PC] button on the main unit.) In addition, the
image cannot be output from the USB.
• Factory setting provides left key : RGB and
right key : NTSC.
(6) USB
(2.0 Compliant)
To transfer image or control the main unit using the
software contained in the supplied Utility Software CD-
ROM by connecting with the PC.
P.31