Epson WorkForce 435 - Manuel (Page 15)

Faxing a Document 15
Faxing a Document
Your product lets you send faxes by entering fax numbers or selecting entries from a speed
dial list. Using the Automatic Document Feeder (ADF), you can fax up to 30 pages at a
time.
Note: You can also send or receive a fax from your computer using the Epson FAX
Utility. For more information, see the online User’s Guide.
Breakdown or repair of this product may cause loss of fax data and settings. Epson is
not responsible for backing up or recovering data and settings during or after the
warranty period. We recommend that you make your own backup or print out your fax
data and settings.
This product allows you to store names and telephone numbers in its memory even
when the power is turned off. Use the following procedure to erase the memory if you
give away or dispose of the product: Press
Setup > Restore Default Settings > All
Settings . This procedure will erase all of your network settings and fax data.
Connecting a Phone or Answering Machine
1. Connect the phone cable from the
wall jack to the LINE port on the
back of the product.
Note: If you’re connecting the
product to a DSL phone line, you
must plug a DSL filter into the
wall jack or you won’t be able to
use the fax or telephone
equipment. Contact your DSL
provider for the necessary filter.
2. To use a telephone or answering
machine on the same line, you
need a second phone cable.
Remove the cap from the
EXT.
port on the back of the product.
Connect one end of the cable to
the telephone or answering
machine, and connect the other
end to the
EXT. port.
Telephone
wall jack
LINE cable
LINE cable
EXT. cable
Telephone
wall jack
andes_p2_QG.book Page 15 Wednesday, May 25, 2011 3:39 PM