Curtis SCR1997 - Manuel (Page 7)

7
you selected. Then the unit will start playback.
8.) Adjust the sound level by pressing the VOLUME+/AL1 or VOLUME-/AL2
buttons.
NOTE:
i. Fully extend and relocate the FM antenna to get better reception
ii. If the received FM stations are in stereo mode, the unit will play in stereo mode
automatically. If reception is weak, press the MO/ST (Mono/Stereo) button to turn
the unit to mono mode.
ALARM OPERATIONS
The unit provides two alarms: AL1 and AL2.You can choose to use them
independently or simutaneously:
SETTING THE ALARM(S)
1.) Press and hold POWER/FUNCTION button to turn off the unit.
2.) Press and hold the VOLUME+/AL1 or VOLUME-/ AL button until the hour digits
blinks. The alarm 1 or alarm 2 indicator will light depending on which alarm is
chosen.
3.) When the hour digits blinks, press the or button to adjust your desired
hour digits.
4.) Press the VOLUME+/AL1 or VOLUME-/AL2 button to save the hour setting, the
minute digits will blink.
5.) When the minute digits blink, press the or button to adjust your desired
minute digits.
6.) Press the VOLUME+/AL1 or VOLUME-/AL2 button to save the minute setting.
7.) Press the VOLUME+/AL1 or VOLUME-/AL2 button and
/ at the same to
select wakeup mode for buzzer (showing “b”) or radio(showing “F”).
8.) Press the VOLUME+/AL1 or VOLUME-/AL2 button and / at the same
time to adjust the volume level.Then press the VOLUME+/ AL1 or VOLUME-/
SNOOzE FUNCTION
When the alarm rings, press the SNOOZE/SLEEP/DIMMER button once. The alarm
will stop and resume after 9 minutes.
TURNING THE ALARM ON/OFF
Press and hold POWER/FUNCTION button to place the unit into STANDBY mode.
Press the VOLUME+/AL1 or VOLUME-/AL2 to deactivate the alarm. The previous
presets will be cancelled and you can follow the alarm setting steps to reset the
alarm.
AL2 button to save.