Curtis SP2412-BLACK-PL - Manuel (Page 8)

7
Bluetooth operation
Pairing a Bluetooth Device for the First Time
1. Power on the unit by pressing the Power button, power indicator will turn on and “ HI ”
appear on LED Display 3 seconds.
2. Press the Source button on the front of the unit repeatedly until “ bt ” appear on LED display
and the sound “ Do “ will be heard. After press and hold the Pairing button.
The “
bt ” will flash quickly. When pairing, remain within 3 feet of the unit.
3. Using the native controls on your Bluetooth device, select the SP2412 in your Bluetooth
settings to pair. If your device requests a password, enter the default password “0000”.
Refer to the user’s manual for your specific device for instructions on pairing and connecting
Bluetooth devices.
4. When successfully paired and connected, a sound “ Dingdong” will issue from the unit and
the “
bt ” will display remain lit.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased
due to a reset of the device. If your device should become unpaired or you find it is unable to
connect, repeat the above steps.
Playing Audio Wirelessly
1. After pairing to a Bluetooth device, use the native controls on the connected Bluetooth
Device to select a track.
2. Play, pause or skip a selected track using the native controls on the connected Bluetooth
Device or the controls on the unit.
3. Audio played through the connected Bluetooth Device will now be heard through the
speakers.
4. Adjust the VOLUME +/- to obtain the desired volume level.
5. Press POWER button again to turn off the unit.