Trouble shooting – Curtis RLC2226 Manuel d'utilisation

Page 50

Advertising
background image

23

Problem

Possible Solution

Poor picture and sound quality

Try another channel.

Adjust the antenna.
Check all wire connections.

No picture or sound under TV status

Try another channel.

Press the TV/AV button.
Make sure the TV is plugged in.
Check the antenna connections.

No sound or sound is too low at
maximum volume

First, check the volume of units connected to your TV.
Adjust the TV volume accordingly.
Check sound adjustment(Volume and Mute)

No color, wrong colors or tints.

Make sure the program is broadcast in color. Select the
picture menu, then adjust the color or tint submenu to the
proper value.

Picture rolls vertically.

Check all wire connections.

Blurred or snowy picture, distorted
sound

Check the direction, location and connections of your antenna.

This interference is often due to the use of an indoor antenna.

Remote control malfunctions

Replace the remote control batteries.
Check the battery terminals.
Remote is out of range, move close to TV
Confirm there is no obstructions between remote and TV
Make sure power cord is plugged in

Image is not centered on the screen.

Adjust the horizontal and vertical position

Clean TV set

When cleaning the LCD screen, please pull out the power

plug, use dry and soft and clean cloth to clean the dust on the
screen and shell. In case of further cleaning for the screen,
please use clean wet cloth. Do not use naphtha, thinner or
similar liquids for cleaning.

Colored point

This product adopts a high-resolution LCD TV, and the colored

point of some pixels may occur due to the special feature of

the product. For a few of colored points, this shall not be

related with terrible product performance or product reliability,
and in case of this situation, the service of the product will not
be influenced. For the criterion of colored points, our company
has similar products with others. The colored point in
conformity with the product criterion is not covered by the
return scope of the product due to quality problems. We hope
our respected customers will forgive us.

Trouble shooting

If you have any problem, check the countermeasure for each symptom listed below.
The following symptoms may have caused by inappropriate adjustment rather than
actual malfunction of the unit. If the trouble persists, contact the service center.

Advertising