Eagle Electronics CUDA 300 - Manuel (Page 30)

24
To turn off Auto Depth Range:
1. Repeatedly press
MENU
until the
D
EPTH
R
ANGE
menu appears. Press ↓
to select
M
ANUAL
, then press
MENU UP
to display the
R
ANGE
S
IZE
menu.
2. Use the arrow keys to select a desired depth range. Press
PWR
to
clear the menu from the display.
Zoom
The zoom feature enlarges all images on the screen by doubling the size
of the echoes (a 2X zoom).
To turn on the Zoom feature:
1. Press the
MENU
key until the
Z
OOM
menu appears. Press ↑ to select
O
N
, then press
PWR
to clear the menu.
You can tell when the display is in Zoom mode because the top depth
scale on the left of the screen will no longer show zero. If the current
range is 0 to 80 feet, turning on the zoom feature will magnify the water
column between 40 feet to 80 feet.
To turn off the zoom feature:
1. Press the
MENU
key until the
Z
OOM
menu appears. Press ↓ to select
O
FF
, then press
PWR
to clear the menu. The top of the depth range scale
returns to zero.
NOTE:
You can select from these zoom size ranges: 0-10, 5-15, 10-20, 15-
30, 20-40, 30-60, 40-80, 50-100, 75-150, 100-200, 150-300, 200-400,
300-600, 400-800, 500-1000, 750-1500 and 1000-2000.
To select a zoom range:
1. Make sure Depth Range is set to manual mode. Press
MENU
until
the
Z
OOM
menu appears. Press ↑ to select
O
N
, then press
MENU UP
to
display the
Z
OOM
R
ANGE
menu.
2. Use the arrow keys to select a desired zoom size. Press
PWR
to clear
the menu from the display.