Maytag MGC9536DS - Manuel (Page 6)

Selecting the proper flame size
The flame size should match the cookware you are using. When you
adjust the heat, watch the flame, not the knob. A flame larger than the
bottom of the cookware wastes energy and will heat the handle.
■ High flame - Start food cooking, bring water to a boil, pan broiling.
■ Medium flame - Maintain a slow boil, fry or sauté, thicken sauces,
steam, stew.
■ Low flame - Keep food cooking, simmer, keep food warm.
Cookware
Ideal cookware should have a flat bottom, straight sides and a well-
fitting lid. The material should be medium to heavy thickness.
Rough finishes may scratch the cooktop. Aluminum and copper
cookware may be used but may leave permanent marks on the grates
or cooktop. Use the chart below as a guide for cookware material.
IMPORTANT: Do not leave empty cookware on a hot surface cooking
area or burner.
Canning
When canning for long periods, alternate the use of burners between
batches to allow time for the most recently used area to cool.
■ Center the canner on the gate.
■ Do not place the canner on 2 burners at the same time.
For more information, contact your local agricultural department or a
company that manufactures home canning products.
First try the solutions suggested here. If you need further assistance or more recommendations that may help you to avoid a service call, refer to
the warranty page in this manual and scan the code with your mobile device, or visit https://www.maytag.com/product_help. In Canada, visit
http://www.maytag.ca.
Contact us by mail with any questions or concerns at the address below:
In the U.S.A.:
Maytag Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
In Canada:
Maytag Brand Home Appliances
Customer eXperience Centre
200 - 6750 Century Ave.
Mississauga, Ontario L5N 0B7
Please include a daytime phone number in your correspondence.
COOKING WITH YOUR COOKTOP
WARNING
Fire Hazard
Do not let the burner flame extend beyond the edge of
the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in death
or fire.
REMEMBER: When cooktop is in use, the entire cooktop
area may become hot.
PROBLEM SOLVER
IF YOU
EXPERIENCE
RECOMMENDED SOLUTIONS
Nothing will
operate Check the following:
■ Make sure the power supply cord is plugged
into a grounded 3 prong outlet.
■ Replace the fuse or reset the circuit breaker. If
the problem continues, call an electrician.
■ Make sure the cooktop is properly connected to
the gas supply. Contact a service technician or
refer to the installation instructions.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING