Maytag MET3800XW - Manuel (Page 9)

9
5.
Add fabric softener to dispenser
(on some models)
Pour a measured amount of liquid fabric
softener into dispenser, always follow
manufacturer’s directions for correct amount
of fabric softener based on your load size.
Dilute liquid fabric softener by filling the
dispenser with warm water until liquid reaches
the underside of the rim. See max fill line arrows.
Do not overfill.
IMPORTANT: Fabric Softener option must be selected to “On”
to ensure proper distribution at correct time in cycle.
Adding Liquid Fabric Softener Manually to Wash Load
During the final rinse, wait until the washer has completed filling,
push in the Cycle knob to pause the washer. Lift the lid and add
the measured recommended amount of liquid fabric softener
(diluted with 1/2 to 1 cup [125 to 250 mL] warm water). Do not
use more than the recommended amount. Close the lid and pull
out the Cycle knob to start the washer.
4.
Add liquid chlorine bleach
to dispenser
Liquid
Chlorine Bleach
Do not overfill, dilute, or use more than 1 cup (250 mL).
Do not use color-safe bleach or Oxi products in the same
cycle with liquid chlorine bleach.
Load garments in loose heaps evenly around basket wall.
For best results, do not pack the load tightly. Do not wrap large
items such as sheets around the agitator; load them in loose piles
around the sides of the basket. Try mixing different sized items to
reduce tangling.
3.
Load laundry into washer
MAX FILL
Turn Cycle knob clockwise to choose your wash cycle.
For more information, see “Cycle Guide.”
6.
Select cycle
IMPORTANT: Do not tightly pack or force items into washer.
Items need to move freely for best cleaning and to reduce
wrinkling and tangling.