Maytag MEDB850YW - Manuel (Page 9)

9
3.
Press POWER/CANCEL
Press the POWER/CANCEL button to turn on the dryer.
4.
Select the desired cycle
Select the desired cycle for your load. See the “Cycle Guide” for
more information about each cycle.
NOTE: Not all cycles are available on all models.
USING YOUR DRYER
1.
Clean the lint screen
Clean the lint screen before each load. Pull the lint screen straight
up. Roll lint off the screen with your fingers. Do not rinse or wash
screen to remove lint. Wet lint is hard to remove. Push the lint
screen firmly back into place.
For additional cleaning information, see “Dryer Care”.
2.
Load the dryer
Open the door by pulling on the handle. Place laundry in the dryer.
Add a dryer sheet to wet load, if desired. Close the door.
IMPORTANT: Do not overload the dryer. Items need to tumble
freely. Overloading can lead to poor drying performance and may
increase wrinkling and tangling.
Steam models
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
Non-steam models