Maytag MEDB850YW - Manuel (Page 8)

8
Items to refresh: Cycle: Drying
Temperature:
Default
Time:
Available
Options:
Cycle Details:
Mixed loads Custom Refresh
(on some models)
Medium
14
Wrinkle Prevent †
Reduce Static
This cycle is best for reducing wrinkles and odors
from dry garments. Select the number of garments to
be refreshed. Cycle time will increase depending on
number of garments selected.
Shirts, blouses, and
slacks
Auto Refresh
High
Medium
22
Use to reduce light wrinkles from small to medium-
sized loads of dry items. Dry time will automatically
adjust when the load size is sensed. Cycle run
time cannot be manually adjusted. Temperature is
selectable. Do not add dryer sheets.
Items to dry: Cycle: Drying
Temperature:
Default
Time:
Available
Options:
Cycle Details:
Any load
NOTE: Select Air Only to dry
foam, rubber, plastic, or heat-
sensitive fabrics
Timed Dry High
Medium
Low
Extra Low
Air Only
40
Wrinkle
Prevent †
Use to dry items to a damp level for items that do not require an
entire drying cycle. Select a drying termperature based on the type
of fabrics in your load. If you are unsure of the temperature to select
for a load select the lower setting rather than the higher setting.
Small loads and sportswear Small Load
18
For small loads of 3-4 items.
Small to lightweight medium
loads
Freshen Up
(for non-
steam
models)
High
Medium
Low
Extra Low
Air Only
20
Use for drying or freshening small to lightweight medium loads.
CYCLE GUIDE — TIMED CYCLES
Settings and options shown in bold are default settings for that cycle. Not all features and cycles are available on all models.
Not all settings and options are available on each cycle. Default cycle times are estimated in minutes.
CYCLE GUIDE — STEAM CYCLES
Settings and options shown in bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
Load Size Recommendations
For best results, follow the load size recommendations noted for
each cycle.
Small load: Fill the dryer drum with 3-4 items,
not more than 1/4 full.
Medium load: Fill the dryer drum up to about 1/2 full.
Large load: Fill the dryer drum up to about 3/4 full.
Do not overload. Items need to tumble freely.
Adjusting drying time on Timed Cycles
When you select a Timed Cycle,
the default time appears in the display.
Use the + and – buttons to increase
or decrease the time in 1 minute
increments. Press and hold to change
the time in 5 minute increments.
The maximum dry time is 100 minutes.
† Or Wrinkle Prevent with Steam (on some models). Wrinkle Prevent with Steam is available only with High and Medium Drying Temperature settings.
Selecting the Drying Temperature
A High heat setting may be used for drying heavyweight items such
as towels and work clothes.
A Low to Medium heat setting may be used for drying medium-
weight items such as sheets, blouses, dresses, underwear,
permanent press fabrics, and some knits.
Use a no heat (Air Only) setting for foam, rubber, plastic, or heat-
sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for various
loads, refer to the care label directions.
† Or Wrinkle Prevent with Steam (on some models). Wrinkle Prevent with Steam is available only with High and Medium Drying Temperature settings.