Danby DPAC 13009 - Manuel (Page 12)

1) DO NOT use gasoline, benzene, thinner, or any other chemicals to clean this unit, as these
substances may cause damage to the finish and deformation of plastic parts.
2) Never attempt to clean the unit by pouring water directly over any of the surface areas, as this
will cause deterioration of electrical components and wiring insulation.
3) Unplug the unit.
4) Clean the unit by wiping off any dirt/dust with a soft damp cloth or vacuum cleaner, then wipe
dry with a dry soft cloth.
5) Clean the air intake grill and replace.
CAUTION: Always store the unit in vertical position. DO NOT put heavy objects on top of the unit.
If the air filter becomes clogged with dust/dirt, air flow is restricted, which reduces cooling
efficiency. The air filter should be cleaned every two (2) weeks. More frequent cleaning may
be necessary depending on indoor air quality.
NOTE: The air filter is located at the upper rear side of the unit.
1) To remove the air filter: Pull the air filter cover upward in the direction of the arrow (Fig. 5)
and remove the air filter.
2) Dust/dirt clogged in the filter can be removed by vacuum cleaning the soiled areas.
3) The filter can also be washed in lukewarm, soapy water while rubbing it lightly with a brush.
A mild detergent (diswashing liquid) is recommended.
4) Rinse the filter well using clean water. Allow time to dry before reinstalling into the unit.
5) Replace the air filter and cover.
6) Replacement air filter information is available by contacting the Customer Service
Department at: 1-800-26- (1-800-263-2629)
CAUTION: Never operate this unit without the air filter in place, as this
may result in damage to the unit.
Fig. 6a Fig. 6b
Store the cable as illustrated in Fig. 6a & 6b below:
CARE AND MAINTENANCE
CLEANING
THE UNIT
CAUTION: Before cleaning or servicing this unit, disconnect from any
electrical supply outlet.
CLEANING
THE AIR FILTER
Fig. 5
11