Hoover S3825 - Manuel (Page 8)

1. How to use
This cleaner was inspected and packaged carefully before being shipped from the factory. If you
should happen to need assistance during assembly or operation, call
1-800-944-9200 for an automated referral of authorized service outlet locations
(U.S. only) OR
1-800-263-6376 to speak with a representative in our Consumer Response Center
Mon-Fri 8AM-7PM EST. OR
Visit us online at www.hoover.com to find the service outlet nearest you (click on the "Service" button).
Cleaner Description
Operate cleaner only at voltage
specified on data plate on bottom
of cleaner.
This cleaner is intended for
household use only.
Not intended for commercial use
in any household or for any other
commercial purpose.
IMPORTANT:
1. Hose inlet (Front of canister)
2. Dirt container
3. Cyclone separator
4. Dirt container handle
5. Dirt cup release button
6. Carry handle
7. Auto cord rewind pedal
8. On/off pedal
9. Plug
10. Exhaust filter cover
11. Wheel
-C^
Accessories
12. Hose
13. Telescopic wand
14. Powered Nozzle
15. Crevice tool
16. Hard floor brush
17. Dusting brush
Thermal Protector
An internal thermal protector is installed
in your cleaner to prevent overheating
if a large item or clog gets caught in the
nozzle or if the pre-motor filter becomes
extremely dirty. When the blockage is not
removed, the thermal protector will trip
and cleaner will stop running.
If this happens, turn cleaner OFF and
disconnect cleaner from electrical outlet.
Then disconnect nozzle and remove ob­
struction. Within 30 minutes the thermal
protector will cool and automatically reset
and cleaning may resume.
If cleaner does not operate, allow addi­
tional time for thermal protector to reset.
Note: The canister must remain un­
plugged during the 30 minute cooling
period.